您好,歡迎光臨思孚科技網站!
先端絲錐
專業制造 卓越品質
先端絲錐

先端絲攻系列

先斷絲攻因前端鋒刃槽部有特殊之槍膛刃槽設計,所以排屑容易,扭力小精度穩定使絲攻耐久性更進一層的改進,適用于通孔之高速攻牙作業效果良好。
一般用先端絲攻
深孔用先端絲攻
不銹鋼用先端絲攻
鍍鈦處理先端絲攻
氧化處理先端絲攻

Apex tap series

First broken wire tapping for front blade groove department have special bore blade groove design, so chip easy, torsion small precision stability make tap durability more into a layer of improvement, be applicable to the through hole of high speed tapping operation effect is good.
General use apex tap
Deep hole with apex tap
Stainless steel with apex tap
Plating titanium processing apex tap
Oxidation treatment apex tap

絲攻尺寸表

公 制 英 制 英 制 直 徑φ 四角□ PT PS PF 直徑φ 四角□
M3 W1/8 4 3.22 1/8 1/8 1/8 8 6
M4 M4.5 W5/32 5 4 1/4 1/4 1/4 11 9
M5 M5.5 W3/16 5.5 4.5 3/8 3/8 3/8 14 11
M6 U1/4 W1/4 6 4.5 1/2 1/2 1/2 18 14
U5/16 W5/16 6.1 5 5/8 19 15
M8 M7 6.2 5 3/4 3/4 3/4 23 17
M10 M9 U3/8 W3/8 7 5.5 7/8 24 19
M11 U7/16 W7/16 8 6 1 1 1 26 21
M12 8.5 6.5 11/8 11/8 28 21
U1/2 W1/2 9 7 11/4 11/4 11/4 32 26
M14 M15 U9/16 W9/16 10.5 8 13/8 13/8 13/8 35 26
U5/8 W5/8 12 9 11/2 11/2 11/2 38 29
M16 12.5 10
M17 13 10
M18 U3/4 W3/4 14 11
M20 15 12
M22 U7/8 W7/8 17 13
M24 M25 19 15
M27 M26 U1 W1 20 15
M28 21 17
U1-1/8 W1-1/8 22 17
M30 23 17
M32 U1-1/4 W1-1/4 24 19
M33 25 19
M35 M34 U1-3/8 W1-3/8 26 21
M36 M36 28 21
M39 M40 U1-1/2 W1-1/2 30 23
M42 W1-5/8 32 26
M45 U1-3/4 W1-3/4 35 26
M48 W1-7/8 38 29